Part 2. Information Technology
Chapter 4. IDRS Terminal Input
Section 45. Command Code NRP97
2.4.45 Command Code NRP97
Manual Transmittal
March 31, 2020
Purpose
(1) This transmits revised IRM 2.4.45, IDRS Terminal Input, Command Code NRP97.
Material Changes
(1) IRM 2.4.45 is revised to comply with UWR#156362. IMF Notice Review sample size
(2) September 6, 2019 change effort to update Aged IRM. Added a new Internal Control Number Section.
Effect on Other Documents
IRM 2.4.45, dated October 30, 2015, is superseded.
Audience
LB&I, SB/SE, TE/GE, W&I.
Effective Date
(03-31-2020)
Nancy Sieger
Acting, Chief Information Officer
Program Scope and Objectives
(1) Overview : This IRM provides a resource guide on how to use IDRS program NRP97 to modify the NRPS Local Control Database
(2) Purpose : This IRM contains the resource guide for using IDRS command code NRP97 to modify the NRPS Local Control Database
(3) Audience : LB&I, SB/SE, TE/GE, W&I.
(4) Policy Owner : The Chief Information Officer (CIO) is responsible for overseeing all aspects of our systems that operate the nation’s tax infrastructure.
(5) Program Owner : Account Services, which is under the Director, Customer Service.
(6) Primary Stakeholders : Wage & Investment (W&I), Large Business and International (LB&I), Small Business Self-Employed (SB/SE), Tax Exempt and Government Entities (TE/GE), and Enterprise Operations (EOPS)
(7) Program Goals : This IRM provides the fundamental knowledge and procedural guidance for employees who work Notice Review on IDRS. By following the processes and procedures provided by this IRM, employees will be able to process NRPS requests in a manner that follows IRS policy and procedures while promoting the best interests of the Government.
Overview of Command Code NRP97
(1) Use NRPS command codes to modify the NRPS Local Control Data Base which consists of ten NRPS record types:
NRPS-TIN-REC
NRPS-DLN-REC
NRPS-TPNC-REC
NRPS-MFT-TAXPRD-REC
NRPS-CPNUM-REC
NRPS-BAL-DUE-REC
NRPS-LG-CORP-REC
NRPS-ADJ-REC
NRPS-MISC-REC
NRPS-EMPLOYMENT-CD-REC.
(2) Each record type may be updated by command code NRP97 with a unique command code definer. These command code literals appear on the BASIC OPTIONS menu screen generated by command code NRP97.
T definer used for SSN/EIN option
D for DLN
N for TPNC
M for MFT/TAXPRD
C for CP NUMBER
B for BALANCE DUE AMOUNT
L for LARGE CORPORATION
A for ADJ REASON CODE
I for MISCELLANEOUS IMF/BMF
E for EMPLOYMENT CODE
(3) Besides the updating options (display, change, add, delete) there are two options provided on the command code screens. The "OPTION-MENU " is used to display the Basic Options menu screen on which the user may select another option to continue updating another NRPS record type. The "EXIT TAP" option is used to clear the entire screen and continue to input another command code if desired, or to sign off the IDRS terminal.
(4) Restrictions: Do not run NRPS command codes to update records in between the weekly runs NRP98 and NRP99. However, you can use them for research during this period. If any records have been updated in between these two runs, those updated records will not appear on the NRPS Data Base after NRP99 run. This restriction will ensure continuity in the data base throughout the weekend NRPS runs.
Command Code NRP97
(1) Command code NRP97 is the required first command code for updating the NRPS Local Control Data Base.
(2) Terminal Input/Output: See Exhibit 2.4.45-1.
(3) Valid Response: The BASIC OPTIONS menu screen is generated. See Exhibit 2.4.45-2.
Generated BASIC OPTIONS Menu Screen
(1) Use this generated screen to select an appropriate option for updating a particular NRPS record type.
(2) Terminal Input/Output: See Exhibit 2.4.45-2.
(3) Valid Response: One of the following command code input screens is generated: NRP97T, NRP97D, NRP97N, NRP97C, NRP97B, NRP97A, NRP97M, NRP97L, NRP97I and NRP97E.
Command Code NRP97T
(1) Use this command code to update the NRPS TIN records on the NRPS Local Control Data Base.
(2) Prerequisite command code-NRP97.
(3) Terminal Input/Output: See Exhibit 2.4.45-3.
(4) Terminal Responses are displayed one at a time on line 24 of the command code NRP97T screen. See IRM 2.4.45.4.1, Terminal Responses for CC NRP97T.
Terminal Responses for CC NRP97T
(1) Invalid Response Error Messages
IMF/BMF REQUEST NOT "I" OR "B" — Record Indicator must be "I" for IMF or " B" for BMF. Correct and re-enter.
RETURN CHARGE OUT MUST BE "Y" OR "N " — Self explanatory. Correct and re-enter.
ENTER ONLY SSN OR EIN— Both SSN or EIN were input. Enter either SSN or EIN.
EIN ENTERED, IMF/BMF REQUEST NOT "B" — Change the Record Indicator to "I" and re-enter.
IMF/BMF REQUEST IS "I", ENTER SSN ONLY — Both SSN and EIN were input. Must enter SSN only and re-enter.
INVALID MFT-RE-ENTER— MFT input is not numeric or is 00 or 30. Correct and re-enter.
TIN IS NOT NUMERIC— Self explanatory. Correct and re-enter.
MFT/TAX PERIOD ARE BMF OPTIONS ONLY — MFT/TAX PERIOD are invalid options for IMF. Correct and re-enter.
INVALID TAX PERIOD ENTERED— Tax period must be numeric and YEAR must be 1962 and MONTH must be 01–12. Correct and re-enter.
VALID KEYS ARE 85, 86, 87, 88, 89, 90 OR 99—Substitute key input is not one of the above keys. Correct and re-enter.
RETENTION INDICATOR NOT "Y" OR "N" — Self explanatory. Correct and re-enter.
PRIORITY INDICATOR NOT "Y" OR "N" — Self explanatory. Correct and re-enter.
PRIORITY IS BMF OPTION ONLY — Priority Indicator must not be set to "Y" for IMF. Correct and re-enter.
PACKAGE INDICATOR NOT "Y" OR "N" — Self explanatory. Correct and re-enter.
(2) General Error Messages.
ACTION INDICATOR NOT "X" — Self explanatory. Correct and re-enter.
SELECT ONLY ONE ACTION — More than one action field entered. Correct and re-enter.
ENTER "X" IN APPROPRIATE ACTION FIELD — No action entered. Correct and re-enter.
PLEASE INPUT CC NRP97 AS A PREREQUISITE — CC NRP97 must precede NRP97T, NRP97D, NRP97N, NRP97C, NRP97M, NRP97L, NRP97B, NRP97A or NRP97I.
NOT IN PRODUCTION MODE-NOTHING UPDATED— To update the NRPS Data Base, user must sign on the IDRS terminal with an "P" for production mode.
RECORD ALREADY EXISTS — Unable to add or delete since the record is already on the NRPS Data Base. Use the "CHANGE" field to change the record.
RECORD NOT FOUND — Unable to display or change since the record doesn't exist on the NRPS Data Base. Use the "ADD" field to add the record.
NRPS DATA BASE AREA NOT AVAILABLE — The NRPS area is down at the moment. Re-input when it is up.
NRPS INPUT/OUTPUT ERROR REENTER — Error returned when the NRPS area is accessed. Notify CSA.
(3) Warning Messages
RECORD ADDED-MAX IMF TINS EXCEEDED . nnnnn RECORDS — The IMF record was successfully added to the data base. "nnnnn" indicates that the total of IMF TINs is exceeding the limit of 15,000 records.
RECORD ADDED-MAX BMF TINS EXCEEDED . nnnnn RECORDS — The BMF record was successfully added to the data base. "nnnnn" indicates that the total of BMF TINs is exceeding the limit of 2,000 records.
(4) Request Completed Messages.
RECORD ADDED-TOTAL IMF TINS: nnnnn RECORDS — The IMF record was successfully added to the data base. "nnnnn" is a number of IMF TIN records on the NRPS data base.
RECORD ADDED-TOTAL BMF TINS: nnnnn RECORDS — The BMF record was successfully added to the data base. "nnnnn" is a number of BMF TIN records on the NRPS data base.
RECORD CHANGED — The record was successfully changed on the NRPS data base.
RECORD DELETED — The record was successfully deleted from the NRPS data base.
RECORD FOUND AND DISPLAYED — The record was found and displayed on the screen.
Command Code NRP97D
(1) Use this command code to update the NRPS DLN records on the NRPS Local Control Data Base.
(2) Prerequisite command code-NRP97.
(3) Terminal Input/Output: See Exhibit 2.4.45-4.
(4) Terminal Responses are displayed one at a time on line 24 of the command code NRP97D screen. See IRM 2.4.45.5.1, Terminal Responses for CC NRP97D.
Terminal Responses for CC NRP97D
(1) Invalid Response Error Messages.
IMF/BMF REQUEST NOT "I" OR "B" — Record Indicator must be "I" for IMF or " B" for BMF. Correct and re-enter.
RETURN CHARGE OUT MUST BE "Y" OR "N " — Self explanatory. Correct and re-enter.
INVALID DLN—DLN input is not numeric. Correct and re-enter.
INVALID ERS DLN—ERS DLN input is not numeric. Correct and re-enter.
ENTER ERS OR PARTIAL/FULL DLN-ERS or PARTIAL/ FULL DLN was not input. Enter either ERS or PARTIAL/FULL DLN and re-enter.
ENTER ONLY ERS OR PARTIAL/FULL DLN—Two DLN fields were input. Enter either ERS or PARTIAL/FULL DLN and re-enter.
VALID KEYS ARE 85, 86, 87, 88, 89, 91 OR 99 — Substitute key input is not one of the above keys. Correct and re-enter.
PRIORITY INDICATOR NOT "Y" OR "N"— Self explanatory. Correct and re-enter.
PRIORITY IS BMF OPTION ONLY — Priority indicator must not be set to "Y" for IMF. Correct and re-enter.
PACKAGE INDICATOR NOT "Y" OR "N" — Self explanatory. Correct and re-enter.
(2) General Error Messages — See IRM 2.4.45.4.1, item 2.
(3) Warning Messages.
RECORD ADDED-MAX IMF DLNS EXCEEDED . nnnnn RECORDS — The IMF DLN record was successfully added to the data base. "nnnnn" indicates that the total of IMF DLNs is exceeding the limit of 10,000 records.
RECORD ADDED-MAX BMF DLNS EXCEEDED . nnnnn RECORDS — The BMF DLN record was successfully added to the data base. "nnnnn" indicates that the total of BMF DLNs is exceeding the limit of 6,000 records.
RECORD ADDED-MAX IMF PARTIAL DLNS EXCEEDED. nnnnn RECORDS — The IMF PARTIAL DLN record was successfully added to the data base. " nnnnn" indicates that the total of IMF PARTIAL DLNs is exceeding the limit of 200 records.
RECORD ADDED-MAX BMF PARTIAL DLNS EXCEEDED. nnnnn RECORDS — The BMF PARTIAL DLN record was successfully added to the data base. " nnnnn" indicates that the total of BMF PARTIAL DLNs is exceeding the limit of 100 records.
(4) Request Completed Messages.
RECORD ADDED-TOTAL IMF DLNS: nnnnn RECORDS — The IMF DLN record was successfully added to the data base. "nnnnn" is a number of IMF DLN records on the NRPS data base.
RECORD ADDED-TOTAL BMF DLNS: nnnnn RECORDS — The BMF DLN record was successfully added to the data base. "nnnnn" is a number of BMF DLN record on the NRPS data base.
RECORD ADDED-TOTAL IMF PART DLNS : nnnnn RECORDS — The IMF PARTIAL DLN record was successfully added to the data base. "nnnnn" is a number of IMF PARTIAL DLN records on the NRPS data base.
RECORD ADDED-TOTAL BMF PART DLNS : nnnnn RECORDS — TheBMF PARTIAL DLN was successfully added to the data base. "nnnnn" is a number of BMF PARTIAL DLN records on the NRPS data base.
RECORD CHANGED — The record was successfully changed on the NRPS data base.
RECORD DELETED — The record was successfully deleted from the NRPS data base.
RECORD FOUND AND DISPLAYED — The record was found and displayed on the screen.
Command Code NRP97N
(1) Use this command code to update the NRPS TPNC and TPNC GROUP records on the NRPS Local Control Data Base.
(2) Prerequisite command code-NRP97.
(3) Terminal Input/Output: See Exhibit 2.4.45-5.
(4) Terminal Responses are displayed one at a time on line 24 of the command code NRP97N screen. See IRM 2.4.45.6.1, Terminal Responses for CC NRP97N.
Terminal Responses for CC NRP97N
(1) Invalid Response Error Messages.
ENTER ONLY TPNC OR TPNC GROUP — Both fields were input, enter either TPNC or TPNC GROUP and re-enter.
MUST ENTER TPNC OR TPNC GROUP — Both fields left blank, enter either TPNC or TPNC GROUP and re-enter.
TPNC MUST BE NUMERIC — Self explanatory. Correct and re-enter.
PRIORITY "Y"-100% MUST BE SELECTED — Priority field was set to "Y" and Percentage selected was not 100%. Correct and re-enter.
PRIORITY "Y" FOR TPNC ONLY — Priority "Y" is not a valid option for TPNC GROUP. Correct and re-enter.
PRIORITY INDICATOR NOT "Y" OR "N" — Self explanatory. Correct and re-enter.
PACKAGE INDICATOR NOT "Y" OR "N" — Self explanatory. Correct and re-enter.
CP NUMBER IS VALID FOR TPNC ONLY —CP Number is not a valid option for TPNC GROUP . Correct and re-enter.
INVALID CP NUMBER—CP Number input is 0000 or all alpha characters, or with embedded blank(s) or alpha character(s). A valid CP Number must be numeric and may include any ending alpha character— e.g. 128, 21A, 51E...
INVALID CP, NUMBER MUST START IN POS 1 — The first position of CP Number was left blank. Correct and re-enter.
(2) Percentage Input Error Messages.
PERCENTAGE INDICATOR NOT "X" — Percentage indicator must be "X". Correct and re-enter.
SELECT ONLY ONE PERCENTAGE — More than one percentage was selected. Correct and re-enter.
ENTER "X" IN APPROPRIATE % FIELD — No percentage was selected. Correct and re-enter.
(3) General Error Messages — See IRM 2.4.45.4.1. item 2.
(4) The following message is displayed by one of Command Code NRP97N, NRP97M, NRP97A and NRP97C when a 0% is present on the record.
CURRENT RECORD SHOWS 0%-MUST CHANGE OR DELETE— The record was displayed and shows a 0% on the percentage field. Enter a significant percent or delete the record.
(5) Request Completed Messages.
RECORD ADDED — The record was successfully added to the NRPS data base.
RECORD CHANGED — The record was successfully changed on the NRPS data base.
RECORD DELETED — The record was successfully deleted from the NRPS data base.
RECORD FOUND AND DISPLAY — The record was found and displayed on the screen.
Command Code NRP97B
(1) Use this command code to update the NRPS BALANCE DUE AMOUNT records on the NRPS Local Control Data Base.
(2) Prerequisite command code-NRP97.
(3) Terminal Input/Output: See Exhibit 2.4.45-6.
(4) Terminal Responses are displayed one at a time on line 24 of the command code NRP97B screen. See See IRM 2.4.45.7.1, Terminal Responses for CC NRP97B.
Terminal Responses for CC NRP97B
(1) Invalid Response Error Messages.
IMF/BMF REQUEST NOT "I" OR "B" — Record Indicator must be "I" for IMF or " B" for BMF. Correct and re-enter.
RETURN CHARGE OUT MUST BE "Y" OR "N " — Self explanatory. Correct and re-enter.
ENTER ONLY NUMERIC VALUES ON AMOUNT —- Amount input with leading blank(s), or with embedded blank(s) or non-numeric character(s). Input amount with leading zero(s) if necessary. Correct and re-enter.
≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡
VALID KEYS ARE 85, 86, 87, 88, 89, 93 OR 99—Substitute key input is not one of the above keys. Correct and re-enter.
PRIORITY INDICATOR NOT "Y" OR "N" — Self explanatory. Correct and re-enter.
PRIORITY IS BMF OPTION ONLY — Priority indicator must not be set to "Y" for IMF. Correct and re-enter.
PACKAGE INDICATOR NOT "Y" OR "N" — Self explanatory. Correct and re-enter.
(2) General Error Messages — See IRM 2.4.45.4.1, item 2.
(3) Request Completed Messages — See IRM 2.4.45.6.1. item 5
Command Code NRP97M
(1) Use this command code to update the NRPS MFT/TAX PERIOD records on the NRPS Local Control Data Base.
(2) Prerequisite command code-NRP97.
(3) Terminal Input/Output: See Exhibit 2.4.45-7.
(4) Terminal Responses are displayed one at a time on line 24 of the command code NRP97M screen. See IRM 2.4.45.8.1, Terminal Responses for CC NRP97M.
Terminal Responses for CC NRP97M
(1) Invalid Response Error Messages.
RETURN CHARGE OUT MUST BE "Y" OR "N " — Self explanatory. Correct and re-enter.
INVALID MFT-RE-ENTER — MFT input is not numeric. Correct and re-enter.
VALID KEYS ARE 85, 86, 87, 88, 89, 97 OR 99 — Substitute key input is not one of the above keys. Correct and re-enter.
INVALID TAX PERIOD ENTERED — Tax Period must be numeric and Year must be g62 and Month must be 01–12. Correct and re-enter.
PRIORITY INDICATOR NOT "Y" OR "N" — Self explanatory. Confect and re-enter.
PRIORITY IS BMF OPTION ONLY — Priority Indicator must not be set to "Y" for IMF. Correct and re-enter.
PACKAGE INDICATOR NOT "Y" OR "N" — Self explanatory. Correct and re-enter.
(2) Percentage Input Error Messages — See IRM 2.4.45.6.1, item 2.
(3) Request Completed Messages — See IRM 2.4.45.6.1, item 5.
Command Code NRP97A
(1) Use this command code to update the NRPS ADJUSTMENT REASON CODE records on the NRPS Local Control Data Base.
(2) Prerequisite command code-NRP97.
(3) Terminal Input/Output: See Exhibit 2.4.45-8.
(4) Terminal Responses are displayed one at a time on line 24 of the command code NRP97A screen. See IRM 2.4.45.9.1,Terminal Responses for CC NRP97A.
Terminal Responses for CC NRP97A
(1) Invalid Response Error Messages
RETURN CHARGE OUT MUST BE "Y" OR "N " — Self explanatory. Correct and re-enter.
REASON CODE MUST BE NUMERIC — Self explanatory. Correct and re-enter.
VALID KEYS ARE 85, 86, 87, 88, 89, 96 OR 99 — Substitute key input is not one of the above keys. Correct and re-enter.
PACKAGE INDICATOR NOT "Y" OR "N" — Self explanatory. Correct and re-enter.
(2) Percentage Input Error Messages — See IRM 2.4.45.6.1, item 2.
(3) General Error Messages — See IRM 2.4.45.4.1, item 2.
(4) Request Completed Messages — See IRM 2.4.45.6.1, item 5.
Command Code NRP97C
(1) Use this command code to update the NRPS CP NUMBER/MFT/PENALTY/MATH ERROR CODE/FREEZE CODE/ZIP CODE records on the NRPS Local Control Data Base.
(2) Prerequisite command code-NRP97.
(3) Terminal Input/Output: See Exhibit 2.4.45-9.
(4) Terminal Responses are displayed one at a time on line 24 of the command code NRP97C screen. See IRM 2.4.45.10.1, Terminal Responses for CC NRP97C.
Terminal Responses for CC NRP97C
(1) Invalid Response Error Messages.
IMF/BMF REQUEST NOT "I" OR "B" — Record Indicator must be "I" for IMF or " B" for BMF. Correct and re-enter.
RETURN CHARGE OUT MUST BE "Y" OR "N " — self explanatory. Correct and re-enter.
CP NUMBER MUST BE ENTERED — CP Number was not input. Correct and re-enter.
INVALID CP NUMBER — CP Number input is 0000 or all alpha characters, or with embedded blank(s) or alpha character(s). A valid CP Number must be numeric and may include any ending alpha character— e.g. 128, 21A, 51E...
INVALID CP, NUMBER MUST START IN POS 1 — The first position of CP Number was left blank. Correct and re-enter.
ZIP-CODE SELECTED, % MUST BE BLANK —Since 100% is a default for zip codes range option. It is not necessary to select percentage. Correct and re-enter.
VALID KEYS ARE 85, 86, 87, 88, 89, 92 OR 99 — Substitute key input is not one of the above keys. Correct and re-enter.
INVALID PENALTY CODE — Penalty Code input is not numeric. Correct and re-enter.
INVALID MFT-RE-ENTER — MFT input is not numeric or is 30. Correct and re-enter.
MFT IS REQUIRED FOR BMF MATH-ER-CD — Enter BMF MFT for selected Math Error Code and re-enter.
MFT IS BMF OPTION ONLY — Self explanatory. Correct and re-enter.
INVALID MATH ERROR CODE — Math Error Code input is not numeric. Correct and re-enter.
MATH-ER-CD IS VALID FOR CP NUM & MFT ONLY — Self explanatory. Correct and re-enter.
MATH ERROR CODE IS BMF OPTION ONLY — Self explanatory. Correct and re-enter.
INVALID FREEZE CODE — The left or right hand position of Freeze Code is not an alpha character (A-Z), a hyphen (-), an underline character ( _) or a blank. It must have an alpha letter followed or preceded by one of these characters: hypen (-), underline (_), blank—e.g. A-, A A[slashb] ....
Note: a blank and underline character will be automatically changed to a hypen.
FREEZE-CD IS BMF OPTION ONLY — Self explanatory. Correct and re-enter.
FREEZE-CD IS VALID FOR CP NUMBER ONLY — Self explanatory. Correct and re-enter.
MUST ENTER THE FIRST ZIP CODE — The second zip code was input but the first zip code is missing. Correct and re-enter.
ZIP CODE IS NOT NUMERIC — Self explanatory. Correct and re-enter.
ZIP CODE IS INVALID —The 4th and 5th digits of the zip code are zeroes. Correct and re-enter.
ZIP CODE IS VALID FOR CP NUMBER ONLY —Zip code is a valid option for CP NUMBER only. Correct and re-enter.
2ND ZIP-CD MUST BE EQUAL OR >1ST ZIP-CD — The second zip code input is less than or not equal to the first zip code. Correct and re-enter.
PRIORITY INDICATOR NOT "Y" OR "N" — Self explanatory. Correct and re-enter.
PRIORITY IS IMF & BMF OPTION — Self explanatory. Correct and re-enter. Correct and re-enter.
PACKAGE INDICATOR NOT "Y" OR "N" — Self explanatory. Correct and re-enter.
(2) Percentage Input Error Messages — See IRM 2.4.45.6.1, item 2.
(3) General Error Messages — See IRM 2.4.45.4.1. item 2.
(4) Request Completed Messages — See IRM 2.4.45.6.1. item 5.
Command Code NRP97I
(1) Use this command code to update the NRPS MISCELLANEOUS IMF/BMF record on the NRPS Local Control Data Base. This record is always displayed when CC NRP97I is called. If the record doesn't exist on the data base, use the "CHANGE" field to create it.
(2) Prerequisite command code-NRP97.
(3) Terminal Input/Output: See See Exhibit 2.4.45-10.
(4) Terminal Responses are displayed one at a time on line 24 of the command code NRP97I screen. See IRM 2.4.45.11.1, Terminal Responses for CC NRP97I.
Terminal Responses for CC NRP97I
(1) Invalid Response Error Messages.
EXCEPTION NOT "Y" OR "N" — Self explanatory. Correct and re-enter.
SELECTION LIMIT NOT NUMERIC — Self explanatory. Correct and re-enter.
SELECTION LIMIT MUST BE 20,000 TO 99,999 — Selection Limit input is less than 20,000. Correct and re-enter.
TPNC CHARGE OUT NOT "Y" OR "N" — Self explanatory. Correct and re-enter.
(2) General Error Messages — See IRM 2.4.45.4.1, item 2.
(3) Valid Response — RECORD CHANGED — The record was successfully changed on the NRPS data base.
Command Code NRP97L
(1) Use this command code to update the NRPS LARGE CORPORATION records on the NRPS Local Control Data Base.
(2) Prerequisite command code-NRP97.
(3) Terminal Input/Output: See Exhibit 2.4.45-11.
(4) Terminal Responses are displayed one at a time on line 24 of the command code NRP97L screen. See IRM 2.4.45.12.1, Terminal Responses for CC NRP97L.
Terminal Responses for CC NRP97L
(1) Invalid Response Error Messages.
RETURN CHARGE OUT MUST BE "Y" OR "N " — Self explanatory. Correct and re-enter.
EIN MUST BE NUMERIC-RE-ENTER — Self explanatory. Correct and re-enter.
PACKAGE INDICATOR NOT "Y" OR "N" — Self explanatory. Correct and re-enter.
(2) General Error Messages — See IRM 2.4.45.4.1, item 2.
(3) Request Completed Messages — See IRM 2.4.45.6.1, item 5.
Command Code NRP97E
(1) Use this command code to update the NRPS EMPLOYMENT CODE records on the NRPS Local Control Data Base.
(2) Prerequisite command code-NRP97.
(3) Terminal Input/Output: See Exhibit 2.4.45-12.
(4) Terminal Responses are displayed one at a time on line 24 of the command code NRP97E screen. See IRM 2.4.45.13.1, Terminal Responses for CC NRP97E.
Terminal Responses for CC NRP97E
(1) Invalid Response Error Messages.
RETURN CHARGE OUT MUST BE "Y" OR "N " — Self explanatory. Correct and re-enter.
EMPLOYMENT CODE IS NOT C, F. G. M, N. S. T. W — Employment Code input is not one of the above codes. Correct and re-enter.
ENTER ONLY NUMERIC VALUES IN AMOUNT — Amount input with leading or embedded blank(s) or with non-numeric character(s). Input only numeric digits with leading zero(s) if necessary. Correct and re-enter.
VALID KEYS ARE 85, 86, 87, 88, 89, 96 OR 99 — Substitute key input is not one of the above keys. Correct and re-enter.
PRIORITY INDICATOR NOT "Y" OR "N" — Self explanatory. Correct and re-enter.
PACKAGE INDICATOR NOT "Y" OR "N" — Self explanatory. Correct and re-enter.
(2) General Error Messages — See IRM 2.4.45.4.1, item 2.
(3) Request Completed Messages — See IRM 2.4.45.6.1, item 5.
CC NRP97
(1) Input Display:
(2) Record Element Description:
ITEM | LINE | POSITION | DESCRIPTION AND VALIDITY |
|---|---|---|---|
1 | 1 | 1–5 | CC NRP97 |
Generated BASIC OPTIONS Menu Screen
(1) Input Display:
(2) Record Element Description:
CC NRP97T
(1) Input Display:
(2) Record Element Description
ITEM | LINE | DESCRIPTION AND VALIDITY |
|---|---|---|
1 | 4 | RECORD INDICATOR — Must be "I" for IMF or "B" for BMF |
2 | 6 | RETURN CHARGEOUT INDICATOR — Must be "Y" or "N". |
3 | 9 | SSN — Numeric only. |
4 | 9 | EIN — Numeric only. If entered, Record Indicator on item 1 must be "B". |
5 | 11 | SUBSTITUTE KEY — Optional, must be numeric. Valid keys are 85, 86, 87, 88, 88, 89, 90 or 99. |
6 | 12 | MFT — Optional, BMF option only. Must be numeric and not 00 or 30. |
7 | 13 | TAX PERIOD — Optional BMF option only. Must be numeric and YYYYMM format. |
8 | 14 | RETENTION INDICATOR — Optional, must be "Y" or "N". "N" is generated on the screen as a default. If set to "Y", the record will remain on file until it is manually deleted or it is selected for review. |
9 | 15 | PRIORITY INDICATOR — Optional, BMF option on.y. Must be "Y" or "N". "N" is generated on the screen as a default. |
10 | 16 | PRINT PACKAGE INDICATOR — Optional indicating whether or not a notice package will be generated by the weekend NAS runs. Must be "Y" or "N". "Y" is generated on the screen as a default. |
11 | 18 | DISPLAY INDICATOR — Enter "X" on this field to display an existing record on the data base. |
7CC NRP97D
(1) Input Display:
(2) Record Element Description:
CC NRP97N
(1) Input Display:
(2) Record Element Description:
CC NRP97B
(1) Input Display:
(2) Record Element Description:
ITEM | LINE | DESCRIPTION AND VALIDITY |
|---|---|---|
1 | 4 | RECORD INDICATOR — Must be "I" for IMF or "B" for BMF. |
2 | 6 | RETURN CHARGEOUT INDICATOR — Must be "Y" or "N". |
3 | 9 | ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ ≡ |
4 | 11 | SUBSTITUTE KEY —Optional, must be numeric. Valid keys are 85, 86, 87, 88, 89, 93 or 99. |
5 | 12 | PRIORITY INDICATOR —See CC NRP97T. |
6 | 13 | PRINT PACKAGE INDICATOR — Optional, indicating whether or not a notice package will be generated by the weekend NAS runs. Must be "Y" or "N ". "Y" is generated on the screen as a default. |
7 | 18 | DISPLAY INDICATOR — See CC NRP97T. |
8 | 18 | CHANGE INDICATOR — See CC NRP97T. |
9 | 18 | ADD INDICATOR — See CC NRP97T. |
10 | 18 | DELETE INDICATOR — See CC NRP97T. |
11 | 18 | OPTION MENU INDICATOR — See CC NRP97T. |
12 | 18 | EXIT TAP INDICATOR — See CC NRP97T. |
13 | 24 | MESSAGE — See IRM 2.4.45.7, for item (4) Terminal Response. |
CC NRP97M
(1) Input Display:
(2) Record Element Description:
CC NRP97A
(1) Input Display:
(2) Record Element Description:
CC NRP97C
(1) Input Display:
(2) Record Element Description
CC NRP97I
(1) Input Display:
(2) Record Element Description:
CC NRP97L
(1) Input Display:
(2) Record Element Description:
CC MRP97E
(1) Input Display
(2) Record Element Description:
